Water Jet Cutting Advantages - Monroe Rubber

Anything you know and you would like to share out. Please put here and we will categorize your article later.

Water Jet Cutting Advantages - Monroe Rubber

Postby Chris » Mon Jun 20, 2011 6:13 pm

Water Jet Cutting Advantages
By : Monroe Rubber

Image

Increase production by more than 60%
Waterjet-cut rubber from MRP dramatically improves speed and profits.


Monroe Rubber offer Custom Waterjet Cut rubber for your complex jobs. Send them the file and information about what is being cut and they will layout and cut rubber to perfectly eject the product as well as the scrap areas.

A map will be provided for quick and easy application to the die.

For complex dies or to take advantage of the extreme speed of the newest diecutters, try it and they will split the cost with you. At 50% your rubber cost will be far less than if you used rubber pieces out of a box. Try it! You have nothing to lose except profits...that is, if you don't do it.


Image......Image
Conventional Rubbering Method 4,000 s/hr.........Waterjet-Cut Rubbering Method 6,500 s/hr.

From 4,000 to 6,500 impressions per hour...


The above photos depict two dies for the same job. The left die was rubbered conventionally. It required 1330 individual pieces of rubber, and untold hours of an experienced diemaker's time.

The die on the right used MRP Custom Waterjet-cut Rubber: Only 491 pieces of convenient adhesive-backed rubber with detailed mapping provided... so detailed that a secretary with no previous experience was able to rubber the die quickly and accurately.

The die on the left ran at only 4,000 hits per hour while the MRP die ran reliably at an astounding 6,500 hits per hour. That's a 62.5% increase in press speed for this job... which also means an equal increase in profit as well. What's more, the MRP die was so balanced from an election standpoint that it ran at this speed without nicking the cutting rule.



Source : Monroe Rubber
Chris
 
Posts: 410
Joined: Tue Mar 31, 2009 10:12 pm

Return to Knowledge Base

Who is online

Users browsing this forum: No registered users and 6 guests

cron