Flatbed Die-cutting & Rotary Die-cutting

Anything you know and you would like to share out. Please put here and we will categorize your article later.

Flatbed Die-cutting & Rotary Die-cutting

Postby Chris » Tue May 05, 2009 11:56 am

Flatbed Die-cutting

Flat bed die cutting (or steel rule die cutting) is an efficient and cost effective method to die cut less complex part designs. It is typically used for smaller production quantities.

Parts are manufactured in a reciprocating die cut press using a steel rule die that is bent to form the desired part. A synthetic board holds the steel rule in place. The board is laser cut to ensure accuracy.

Features and Benefits
Able to run thicker materials
Low cost and quick turn around tooling
Available in loose pieces or rolls

Video



Rotary Die-cutting

Rotary diecutting is diecutting using a cylindrical die on a rotary press. A long sheet of material will be fed through the press, and the die will rotate, cutting out shapes, making perforations or creases, or even cutting the sheet into smaller parts. A series of gears will force the die to rotate at the same speed as the rest of the press, ensuring that any cuts the die makes line up with the printing on the material.

Dies used in rotary diecutting are either solid engraved dies or some form of adjustable die. Engraved dies have a much higher tolerance and are machined out of a solid steel bar. Adjustable dies have removable blades that can be easily replaced with other blades, either due to wear or to cut a different material.
Chris
 
Posts: 410
Joined: Tue Mar 31, 2009 10:12 pm

Return to Knowledge Base

Who is online

Users browsing this forum: No registered users and 2 guests

cron